DJI Announces a Firmware Updates for RS 2 and RSC 2 Gimbals

DJI RS 2 and DJI RSC 2 gimbals were announced in October 2020 as a new generation of one-handed stabilizers. As with other products, DJI keeps adding new features and fixes with firmware updates. The recently announced update adds support for many interesting features with supported cameras.

DJI RS 2 Firmware Update v01.04.00.00

The new firmware update adds many interesting features to various supported cameras. Here is a full list of new features and improvements:

  • Added photo capture for Sony a7S III and a7C cameras using a Multi-Camera Control Cable (USB-C).
  • Added photo capture, video recording, camera settings, autofocus, and focus pull support for Sony a1 and FX3 cameras with supported Sony E mount lenses using a Multi-Camera Control Cable (USB-C).
  • Added video recording, camera settings, autofocus, and focus pull support for Sony ZV-1 cameras with supported Zeiss Vario-Sonnar T lenses using a Multi-Camera Control Cable (Micro-USB).
  • Added photo capture, video recording, camera settings, autofocus, and focus pull support for Canon EOS 7D Mark II cameras with supported EF mount lenses using the Multi-Camera Control Cable (Micro-USB).
  • Added photo capture, video recording, camera settings, autofocus, and focus pull support for Panasonic Lumix S1R cameras with supported L-mount lens using a Multi-Camera Control Cable (USB-C).
  • Added video recording, camera settings, autofocus, and focus pull support for BMPCC 6K Pro cameras with supported EF mount lenses using the Multi-Camera Control Cable (USB-C). To use autofocus on the BMPCC 6K Pro, press halfway down on the camera control button of the gimbal (requires camera firmware v7.3.1).
  • Added photo capture, video recording, camera settings, and autofocus for Leica SL2 and SL2-S cameras with supported L mount lenses using the Multi-Camera Control Cable (USB-C).
  • Added aperture, ISO, and EV settings for FUJIFILM X-T4 in video recording mode.
  • Added ActiveTrack for Panasonic LUMIX S1, S1H, S1R, and S5 using the Multi-Camera Control Cable (USB-C). This requires the latest camera firmware that can be downloaded here.
  • Added Steadicam mode.
  • Increase motor rotational speed when using with Ronin 3D Focus System.
  • Optimized rotational speed when calibrating focus motor.
  • Reduced focus motor noise.
  • Fixed issue: Canon R5 and R6 cameras crashed when camera control command was different from the camera shooting mode.
  • Fixed issue: unable to autofocus with FUJIFILM XT3 and XT4 cameras when in video recording mode.
  • Fixed issue: unable to control shutter with BMPCC 4K, 6K, and 6K Pro cameras when using updated camera firmware v7.3.1.

DJI RSC 2 Firmware Update v01.03.00.00

When it comes to the smaller DJI RSC 2, many new features and improvements are the same as with the larger gimbal. Here is the full list of improvements:

  • Added photo capture for Sony a7S III and a7C cameras using a Multi-Camera Control Cable (USB-C).
  • Added photo capture, video recording, camera settings, autofocus, and focus pull support for Sony a1 and FX3 cameras with supported Sony E mount lenses using a Multi-Camera Control Cable (USB-C).
  • Added video recording, camera settings, autofocus, and focus pull support for Sony ZV-1 cameras with supported Zeiss Vario-Sonnar T lenses using a Multi-Camera Control Cable (Micro-USB).
  • Added photo capture, video recording, camera settings, autofocus, and focus pull support for Canon EOS 7D Mark II cameras with supported EF mount lenses using the Multi-Camera Control Cable (Micro-USB).
  • Added photo capture, video recording, camera settings, autofocus, and focus pull support for Panasonic Lumix S1R cameras with supported L-mount lens using a Multi-Camera Control Cable (USB-C).
  • Added video recording, camera settings, autofocus, and focus pull support for BMPCC 6K Pro cameras with supported EF mount lenses using the Multi-Camera Control Cable (USB-C). To use autofocus on the BMPCC 6K Pro, press halfway down on the camera control button of the gimbal (requires camera firmware v7.3.1).
  • Added photo capture, video recording, camera settings, and autofocus for Leica SL2 and SL2-S cameras with supported L mount lenses using the Multi-Camera Control Cable (USB-C).
  • Added aperture, ISO, and EV settings for FUJIFILM X-T4 in video recording mode.
  • Added ActiveTrack for Panasonic LUMIX S1, S1H, S1R, and S5 using the Multi-Camera Control Cable (USB-C). This requires the latest camera firmware that can be downloaded here.
  • Optimized rotational speed when calibrating focus motor.
  • Reduced focus motor noise.
  • Fixed issue: Canon R5 and R6 cameras crashed when camera control command was different from the camera shooting mode.
  • Fixed issue: unable to autofocus with FUJIFILM XT3 and XT4 cameras when in video recording mode.
  • Fixed issue: unable to control shutter with BMPCC 4K, 6K, and 6K Pro cameras when using updated camera firmware v7.3.1.

The firmware updates are now available for download free of charge.

More info on the DJI’s website.


Log in with your credentials

or    

Forgot your details?

Create Account